• 02Jul

    Hunan adequate reserve power capacity

    The past two years, lack of electricity, shortage of economic development such as the shadow quest laptop battery, making the industry outside of the debate on the causes of power shortage here. For reserve power capacity, Hunan “Eleventh Five-Year Plan” will make a “full” power capacity to prepare.

    Specific projects are as follows: water and electricity to speed up power plant Zhexi two Dongjiang 250,000 kilowatts and 250,000 kilowatts of two power station expansion project of the building, the development of the province’s small and medium-sized hydropower resources, by 2010 new installed capacity of not less than two million kW. Thermal power is almost “full capacity” to develop, pay close attention to building Jinzhushan, Xiangtan, Yueyang Huaneng Shihmen two power plants and other projects, four projects total 3.6 million kilowatts capacity; At the same time, to speed up the Yiyang Power Plant Phase II, Huadian Changsha, the hp battery: 367759-001 battery, hstnn-ib 09 battery, hp pavilion dv1000 batteryconstruction of power plants for a number of countries to support the planning and construction of thermal power plants.

    Particularly impressive is that new power has entered a substantive stage of development. Changsha, and moose-feng, Yu, Pingjiang peaking pumped-storage power station has entered the pre-construction stage, will also start the octahedral Xiangxi Hill, Shaoyang nanshan wind farm projects. Follow-up of nuclear power also has become the direction of the new power development, the site has been initially identified Huarong and Taoyuan in the two places, it is necessary to carry out protection.

    Early in October this year, Hunan Development and Reform Commission, in accordance with the unified arrangement of the provincial government, organization and structure of the province’s power industry, “Eleventh Five-Year” Plan and Vision 2020 (Program).

    Planning from the “Tenth Five-Year Plan” the implementation of the first three years of analysis of power to start the “Eleventh Five-Year Plan” Outline for the Development. With the party’s National Congress to build a well-off society, three of our province to speed up the process of sustained and stable growth of the national economy, changes in the economic situation brought about a new round of consumption growth. Hunan electricity the entire society, “15,” an average annual increase of 10.5% in the first three this year, is expected to reach 60.5 billion kwh, an increase of 10.4%. A “Five,” a blueprint for power development, it is refreshing: the active organization of water and electricity, to optimize the development of thermal power, and promote nuclear power construction, appropriate development of natural gas for power generation, and actively develop new energy sources such as wind power. Planning, the guiding ideology of structural adjustment aimed to maintain the pace of power development, and promote further development of the electric power industry from quantity to quality and effectiveness of the speed of transition, from the main supply-oriented, passive power supply to fill the gap, the main shift to demand-oriented to achieve sustainable development.

    “Ahead of” embodied in three aspects: First, pay close attention to the construction of a number of key power plants, “Eleventh Five-Year” needs to add 8.4 million kilowatts of electricity installed capacity, for a new round of economic development to lay a solid foundation; Second, focus efforts on restructuring power structure, power point to enhance the construction of thermal power to resolve the contradictions; Third, it is necessary to optimize the power supply layout, in accordance with the coal source of reliable water and electricity near load centers the standard construction of high-parameter, high-capacity, high-efficiency projects generating units. In short, through the power of structural adjustment, and coordinate with the grid power, hydropower and thermal power, large units and small units hp pavilion dv4000 battery, hp pavilion ze2000 battery, hp presario m2000 battery, the center region and the surrounding areas, the main network and distribution network, large grid and small grid relationship between the achievement of the Hunan Electric Power sustainable development.

    This represents the planning and construction, Hunan Electric Power will play a “storage pool” of performance, boost economic development in Hunan Province to a new level and achieve a new leap forward.

    Fuzhou Fujian battery industry specific pollution remediation

    Fuzhou environmental protection departments at all levels in accordance with the State Environmental Protection Administration and the Fujian Provincial Environmental Protection Agency requirements, organization of environmental protection to carry out special work to bring the battery industry. According to diagnostic investigation, environmental protection departments at all levels of the Fuzhou area nine existing battery production enterprises and sewage treatment of waste lead-acid business of the inspection, three of which are not the implementation of environmental impact assessment or environmental “three at the same time” the illegal sewage enterprises severely dealt with, and battery industries and enterprises focused on industrial pollution sources into the long-term monitoring areas, and effectively protect the environment and people’s health.

    Fuel cells should be the development of new energy in the success of

    A few days ago, by the four home appliances and accessory factories in Dalian Institute of Chemical Physics, Chinese Academy of Sciences to develop the national “863″ the new fuel cell energy projects successful “out” next year will be in volume production in May.

    It is reported that the fuel cell using hydrogen and oxygen in the air a chemical reaction and generate electricity and hydrogen with a drive more than three hundred kilometers. Compared to conventional fuel energy, it has a high rate of energy conversion, less environmental pollution, etc., which is considered the first choice of 21 clean, efficient, clean energy. This will not only fuel cell electric vehicles in use, but also for submarines and other military equipment, have good market prospects.

    The United States will prohibit the use of aircraft cargo transport non-rechargeable lithium batteries

    United States Department of Transportation said in a statement on the 13th, the United States will prohibit the use of aircraft cargo transport non-rechargeable lithium hp presario v2000 battery, compaq presario v5000 battery, compaq presario v4000 battery, but can carry passengers with such a battery of personal computers and other consumer electronic products board.

  • 02Jul

    New type of polymer lithium-ion battery successfully developed

    With independent intellectual property rights of a new type of polymer lithium-ion battery R & D success of a few days ago and will soon be put into the production process of industrialization. According to Science and Technology Daily reported that this unique battery technology is from 4 years ago returning from overseas, led by its researchers Following the liquid plastic film lithium-ion power batteries made after the outcome of an important. At present, the polymer lithium-ion battery production lines are under construction.

    It is understood that the liquid lithium-ion battery is the most high-tech research in recent years one of the important results, representing the current development of the chemical power of the most advanced level. As a result of such batteries with high specific energy and recycling, the good life, such as a significant advantage, now widely used in mobile communications, cameras, laptops and other electronic devices, and is gradually moving towards electric bicycles, electric vehicles and other areas to expand the scope of application. It is estimated that the global lithium-ion dell battery demand has reached 1.3 billion, and with the applications and the ever-expanding year by year.

    In liquid lithium-ion battery at the same time the successful commercialization of polymer lithium-ion battery (PLIB) research has been particular concern to them. As a new generation of lithium-ion battery system, PLIB not only with liquid lithium-ion battery all the technical advantages, but also has a higher specific energy and better safety performance. In addition, PLIB is recognized as the most development potential and future application of the battery market products. It is predicted that in the next few years, PLIB will replace the liquid lithium-ion batteries for nearly 50% market share, there are broad prospects for the development of Japan and many other major battery makers focus on R & D investment and the direction of.

    The past, both at home and abroad polymer lithium-ion battery manufacturers use the United States Bell Laboratories Bellcore process. However, due to the cumbersome process of the method, low efficiency, investment in equipment and the shortcomings of higher cost of production, serious constraints of polymer lithium-ion battery development and industrialization. Domestic and foreign markets in recent years in the so-called polymer lithium-ion battery products, but in fact is a flexible liquid batteries, there are still a large number of internal dynamic electrolyte flow, do not have the characteristics of polymer electrolyte, in the security risk there. With lithium-ion battery in the communications and IT industry’s rapid surge in usage, the battery safety performance is increasingly prominent, not only the requirements of lithium-ion battery has excellent electrical properties, also called for greater security.

    CITIC Beijing UNITA solid profits and new material technology, Beijing Institute of New Energy Materials and Technology Laboratory, through years of research, in a large number of laboratory work on the basis of a number of key materials through an integrated technology, the first synthesis of a unique structure microporous polymer composite membrane, and then use a unique production process of polymer batteries developed a polymer lithium-ion battery. The battery has a very excellent low-temperature discharge performance and cycle performance (over 500). With the same battery capacity compared to liquid packaging, such polymer lithium-ion rechargeable battery and acupuncture in the past, such as safety testing, in particular, a unique performance advantages. Importantly, by researchers and development of new polymer lithium-ion battery production technology, also has a small investment in equipment and production technology is simple and so on. The results with independent intellectual property rights, there is no doubt China will enhance battery manufacturing sector in the international competitiveness and promote domestic polymer lithium-ion kd476 battery, td347 battery, dell inspiron 1501 battery industry and greatly expand the lithium-ion battery applications.

    U.S. R & D of micro-generators to replace the phone battery

    Recently, the USA and Georgia Institute of Technology announced that with the Massachusetts Institute of Technology, working closely with scientists, they have successfully developed a micro-generators, only 10 mm in diameter, is the continuing use of mobile phone battery is more than 10 times.

    Over the years, more and more compact electronic products, and its battery has a larger volume of plays. In order to solve this problem, the scientists have been dedicated to the development of micro-generators, and put forward a number of different principles of micro-generators. And the Georgia Institute of Technology scientists have developed such a generator to replace the phone battery, indicating that micro-generators to enter the electronic products to replace conventional batteries and an important step.

    The principle of the micro-generator is installed in a chip on the induction coil, so that a small rotating magnet around the coil, resulting in sufficient current. Through continuous testing, the rotating speed of the magnet is now up to 100,000 per minute lap, the speed can generate 1.1 kilowatts of electricity, enough to replace the phone battery.

    Fuel cells should be the development of new energy in the success of

    A few days ago, by the four home appliances and accessory factories in Dalian Institute of Chemical Physics, Chinese Academy of Sciences to develop the national “863″ the new fuel cell energy projects successful “out” next year will be in volume production in May.

    It is reported that the fuel cell using hydrogen and oxygen in the air a chemical reaction and generate electricity and hydrogen with a drive more than three hundred kilometers. Compared to conventional fuel energy, it has a high rate of energy conversion, less environmental pollution, etc., which is considered the first choice of 21 clean, efficient, clean energy. This will not only fuel cell electric vehicles in use, but also for submarines and other military equipment, have good market prospects.

    Power grid investment imbalances appear contradictory

    China’s electricity supply situation in 2005 as follows: lack of electricity is reduced, the degree of ease power shortage, the largest gap from 12 to 20 million kilowatts, seasonal power shortages, electricity supply shortages apparent randomness; power grids and power imbalance between investment contradictions begin to be felt.

    Ouyang Changyu said, according to a preliminary statistical analysis of production units in 2005 more than 68.4 million kilowatts, of which 23.8 million kilowatts during the first half of production more than the end of power generation capacity of more than 510 million kilowatts. Electricity shortage in recent years against a background of a lot of money into the field of power construction, signs of a new round of power surplus, the imbalance between investment in the power grid began to gradually expose the contradictions. If the project can not be put into production on schedule or electricity supply problems are not solved, is even more serious power shortage.

    Ouyang Changyu, said in 2005 should attach great importance to investment in power grids and power imbalances, do everything possible to increase power grid investment. Study suggested that the state departments concerned to speed up the market mechanism to play a fundamental role in the macro-control mechanism for project construction as soon as possible the establishment of a unified power grid and power planning, coordination mechanism for development.

    Mobile phone charger base in the world’s largest deep-down dell inspiron 6400 battery, dell inspiron e1505 battery, dell latitude 131l battery

    The world’s largest manufacturing base for mobile phone charger will be unveiled in Shenzhen! Reporter yesterday from the Technology (Shenzhen) Co., Ltd. inaugurated the new plant was informed that the global mobile phone charger industry’s second largest manufacturer Group has major manufacturing operations to Shenzhen, the new plant will allow the completion of the company’s mobile phone charger 1 times higher than production capacity, annual output of mobile phone charger up to 200 million, which became the world’s largest manufacturing base for mobile phone charger.

    Tags: , ,

  • 02Jul

    Japan’s new breakthroughs in energy technologies continue to

    In 2004, Japan in the development of energy technologies continue to make new breakthroughs, mainly in the effective use of renewable energy and energy efficiency aspects of laptop battery. These breakthroughs to accelerate towards the Japanese people and the natural cycle of the coordinated development of the pace of society.

    Innovative energy technologies in Japan focus on the daily lives of people, the most striking outcome of that competition in the domestic fuel cell. Panasonic and other companies have this year launched its own home fuel cell research and development. These products are generally about 1000 watts power generation, fuel gas extracted from the hydrogen, will not produce air pollutants. Technology has matured as a result of the Tokyo Gas Company has decided to play in February 2005 to lease 200 to providing services to families, this is the first fuel cell family in Japan. Tokyo Gas Company about hp battery, intends to use the popularity of home for three years to collect data of fuel cell.

    In wind energy use, such as Toray developed the world’s most lightweight wind turbine “wind dolphin” The recent advent of. Its power to 1000 watts power, weighs just 15 kilograms, the price of about ¥ 300,000. The company plans to produce 1,200 to Taiwan in 2005 this wind turbine. It is estimated that by 2010, Japan’s family-oriented small-scale wind turbine market is about 100 billion yen. Micro-hydropower system in Japan is now the direction of development of hydropower. Japan has begun to attempt to use micro-irrigation drainage of the generation gap.

    Japan’s solar power technology has improved. Sanyo to increase power generation in power at the same time, efforts to reduce the size of solar panels in order to save raw materials and lower costs. Hitachi developed a two-faced to accept the sun’s solar cells, both for walls use sunlight in accordance with the different angles at different times with different surface energy. A titanium dioxide solar cell materials have recently come out in Japan, the price of silicon solar panels to one-fifth of the half, caused widespread interest.

    In the development and utilization of renewable energy technologies at the same time, the Japanese energy-saving technology is also a lot of progress. Panasonic introduced fluorine-free refrigerators this year to take advantage of new insulation materials, energy-saving 87%.

    Sony to launch 5 large-capacity lithium-ion 417066-001 battery, hstnn-lb31 battery, 411462-421 battery

    Sony recently announced that from December 2004 and the beginning of January 2005, followed by the provision of energy density among the industry’s first lithium-ion rechargeable battery and replacement of the cathode material for high-power lithium-ion rechargeable batteries.

    The publication of the lithium-ion rechargeable battery There are five kinds, namely:
    (1) for notebook computers, 2550mAh battery capacity up to the “G8″ series;
    (2)-type polymer, 830mAh battery capacity to the “A8″ series;
    (3) polymer-based, targeted at mobile phone parts and components to reduce the size of the volume and improve the efficiency of the “S Pack”;
    (4) power tools and other equipment as the driving force, the replacement of a cathode material for high-power-type “V” series;
    (5) Similarly the replacement of the cathode material for high-power-type “VT” Series;
    “G8″ campaign by increasing the battery unit to fill the active substance than the original products of the company increased capacity by 6%. “A8″ series in addition to packaging materials, laminated films become thinner, the internal unit by reducing the extra space, so battery capacity than the original products increased 9%. High-power lithium-ion rechargeable battery-type “V” series and “VT” Series will be replaced LiCoO2 cathode material from the Ni (nickel) and Mn (manganese) mixed with a mixed Ni-Mn-type electrode. Electrode and use of Co as compared to a high temperature to improve the safety, the current can be larger. And Ni-Cd rechargeable batteries in comparison, V series and the VT series of volume and weight are reduced by more than half, and compared to nickel-metal hydride rechargeable batteries can also be reduced by about half.

    Sony launched a new lithium-ion battery energy density of the highest

    Sony 9 December, 2004 announced the launch of the latest series of lithium-ion battery, and it has the industry’s highest level of energy density to meet the needs of mobile products for high-capacity battery back-up, strong current demand. The series of products from the beginning of December 2004 Availability

    As a result of laptop computers, digital cameras and mobile phones and other mobile products to enhance performance, the need in the market, has introduced a higher-capacity battery backup. Sony announced in 1991 the world’s first high-energy density, small form factor, light weight, long life lithium-ion battery, and in 1999 launched the shape of a flexible, safer lithium-ion polymer batteries to further meet the market demand. Therefore, the lithium-ion batteries (including lithium ion polymer batteries) has been the global market increased to 1.2 billion new cylindrical lithium-ion batteries and lithium ion polymer batteries to achieve the industry’s highest energy density, enabling mobile products the achievement of long-running. <G8> Cylindrical lithium-ion battery standard diameter of 18 millimeters, the standard height of 65 mm, maintaining the same level of charge / discharge characteristics, with the highest battery capacity - to reach 2550mAh (than conventional batteries to increase by 6% ), to further improve the energy demanding notebook and digital camera capabilities (battery durability). Lithium-ion polymer batteries <A8> product designed to maintain a high degree of flexibility and polymer composition, such as high-security features, to achieve a capacity of up to 830mAh (same size, but Sony’s conventional model to increase by 9%), will enable mobile phones and other small portable products long run. In addition, for mobile phone market, as well as lithium-ion battery market expansion, Sony introduced a new model: S Pack, V Cell, VT Cell Series. S Pack is dedicated to mobile phones for lithium-ion polymer hp pavilion dv2000 battery, hp pavilion dv6000 battery, hp pavilion dv2500 battery pack, through a combination of lithium-ion polymer and packaging technology in two areas, in the limited space to achieve a high efficiency power supply.

    V Cell and VT Cell Series high-current discharge to resolve the problems that can not used in the past lithium-ion battery power tools, cleaning and the use of electric bicycles, and promote a cylindrical high-energy lithium-ion battery market expansion.

    Tags: , ,

« Previous Entries